Friday, December 28, 2012

Custom Ramp Tunnel Cage System for Titan Cement

Thank you and Congratulations to Titan Cement Company Greece for their new Ramp Tunnel Cage System and Refraconsulting for your hard work.

This product is similar to our Personal Protection Tunnel but this was custom designed for Titan Cement's preexisting ramp.

The system is designed to cover the entire bridge section of the ramp that spans over the cooler.

Each cage section withstands impacts of up to 250lbs (113.5kg) dropped from 18 in (455mm) with 3:1 safety factor

Fabricated from 6061 T6 Aluminum with a steel mesh cover.
Each tunnel section is 5 ft (1.5m) long and can be connected together as long or as short as needed

Check out our testing video!

We have been testing and designing Safety Inspection Cages for over 10 Years!

 More info here

Please email or call us for more information 1-360-794-1277

Wednesday, December 19, 2012

Safety Inspection Cages for Lafarge Algeria

Thank you and Congratulations to Lafarge Algeria and thank you to our agents ATC btp Industrie for all your hard work.

Lafarge Algeria received one 4 Man safety inspection cage designed for a 5M kiln and a 2 Man safety inspection cage designed for a 3.75M kiln.

Bricking Solutions Safety Inspection Cages allow personnel to move safely inside of your kiln for inspection.  The cages are light weight fabricated from high grade 6061 T6 aluminum.

Check out our testing video!

 Each cage is designed by a certified engineer and custom designed for your specific needs.

The 2 Man cage can easily be carried with shoulder harness by 2 men and the 4 Man cage can be carried by 4 men.

Our cages are rated for 114 kg (250 lb) dropped from 455mm (18") with a 3:1 safety factor. 

We have been testing and designing Safety Inspection Cages for over 10 Years!

 More info here

Please email or call us for more information 1-360-794-1277

Tuesday, November 13, 2012

Refurbished Classic Stair Step (EOR) with a range of 3 - 5.5M Brick ID $44,750

  • 2,726 kg (6,000 lb) capacity can accommodate 1 pallet of refractory plus masons and tools
  • Unique Cut-Out Keying section allows easy access to key masons
  • All new Quick-Connect cylinders
  • Each arch has its own 3-Way Master Valve. All cylinders on both arches can be operated independently or in unison. When dropped or raised in unison, they are ready to be deployed independently without being reset.

  •  Pneumatic powered hydraulic jack with finger-tip controls
  • Segmented double arch, screw jacks & hydraulic arch jack adjusts for different size kilns.
  • High grade T6-6061 aluminum alloy, lighter with superior strength
  • Crated and ready to ship within 5 business days

Monday, November 5, 2012

Brazilian Cement Market - By Bill Barraugh, President of Bricking Solutions

I just returned from a visit to Brazil with the purpose of updating or reviewing or efforts to break into the Brazilian Cement market with Bricking Solutions services and products. I found that the Brazilian market has many similarities and some differences to other country’s Cement markets.
One similarity is that in a maturing market it is hard for the refractory installers to give up old methods of installation. The resistance to change is a universal human characteristic. Any attempt to educate or suggest new or alternative installation equipment or methods is taken as an insult or an affront to the person or company utilizing older methods.
The key is to find a forward thinking or risk taking person or company to lead the way. Once this person or company experiences success the word will spread fast and others will adapt in order to stay competitive.
Our approach then is to educate and to find that person in a decision making position or forward thinking company that will adopt our methods and lead the industry to a more modern philosophy and installation practices in a particular market.
As one of our commissioning contractors (Anders Karlgren) once said – “Over the past 30 years the cement industry has made great strides toward modernization. From modern computerized control rooms, kiln scanners, robotic filled cement bags, pollution control, etc., but the modernization comes to a screeching halt at the hood door.” With our persistent communication through presentations and educational seminars, not to mention case studies (and benchmarking) and the help of qualified and quality partners and agents we can change this.

Old Method - Pogo Rig
New Method - Flat Deck Ez Flexx Bricking Machine

For more information please contact us. 360-794-1277 / 800-621-7856

Monday, October 1, 2012

The Mechanical Elephant in the Plant

With the economic downturn, the question cement plants are asking is: “How can costs be cut whilst still maintaining or improving efficiency?” The number one factor in achieving these goals is what can be done with current equipment. When internal kiln maintenance equipment is under the microscope, sometimes it is just as easy as having a machine inspected or audited.

Dye penetration testing
In recent years, Bricking Solutions has begun to receive calls from production managers, maintenance managers and contractors in the cement industry asking a lot of specific questions related to equipment safety, such as platform load ratings, fall protection and US safety standards. This really is a time when manufacturing companies need to take a look at what can be done to help get the most out of their current equipment and to educate plants about what is within their reach as far as maintenance is concerned. How many plant managers, kiln engineers, production managers and contractors have been stopped during an outage and/or fined for not having the proper safety features on a bricking machine? How much capital did this cost and how much time did this set them back? Sometimes it is the elephant in the room that costs the most. It is there and everyone sees it, but no one wants to say anything. If someone brings the topic up then they receive the same reply: “it is not in the budget for this year”.

Some of the most important questions to ask are:
  • What is the age of the machine? Metals were not meant to last a lifetime, especially in such a harsh environment. 
  • How many times a year is the machine used?
  • When was the last time it was dye penetration tested?
  • How is it stored?
  • Does it have fall guards? Up and down kiln.
  • How is it being maintained? Who is responsible for the maintenance?
  • What is the load rating?
  • Does it conform to both US and the plant’s safety standards?
 All these things have a great bearing on how long a machine will last and what can be done to help it to last a few more years (if possible), until funds can be secured to upgrade to a newer bricking machine.are currently using equipment that is 5 – 30 years old. As a point of comparison, how many people are still using computers that are 5 years old? This article will now look at the expected load rating of bricking machines that operate in one of the plants within this 78% bracket. A typical pre-2004 Bricking Solutions bricking machine only has a 6000 lb load rating. What happens when the following items are subtracted from a 6000 lb load rating?

  • 3250 lb: one pallet of MAGKOR B322.
  • 1080 – 1320 lb: Masons 6 at 180 – 220 lb.
  • 750 lb: bricking arch.
  • 100 – 300 lb: tools.
This means that only 380 – 820 lb reserve deck capacity remains. This was fine before the industry moved to two shape bricks. However, now half a pallet of MAGKOR B622 has to be added, as well as 2 – 3 different sized key bricks.
  • 1625 lb: MAGKOR B622.
  • 400 lb: key brick.
  • Overloaded: approximately 1600 lb.
Example of poor weld where the incorrect weld
material has been used
As can be seen, the weight has significantly exceeded the designed capacity. It is very important to understand a machine and its limits, as well as what a little maintenance can do to extend the life of current machines.
  • When looking at the frames it is important to know the age of the material. Are there large gouges in the parent metal or welds; when were they last dye penetration tested? This can easily be checked by the manufacturer of the machine or by a certified third party.
  • Most machines are stored on the burn floor, uncovered, in a high heat area. This is partially due to convenience, the logistics of getting the equipment to the burn floor during an outage, and a lack of places to store it. Extended periods of extreme heat or cold tend to break down the o-rings in the top of the cylinders and in the master valves at a faster rate than normal. The master valves are repairable but the o-rings in the top of the cylinders are not. Most people unhook the cylinder hoses and leave the ports open, which leaves the system susceptible to dirt infiltration. It is important to close any open ports on the arch or the long jack to keep the dirt out of the system. 
  • Lubrication is a big part of maintenance. Be sure both before and during a shift that the lubricator filter is full and cycling oil properly and that the system is not full of dirt or water. It is also important to check that the lubricant contains the correct air tool oil. If temperatures are below 40 ˚F this oil should be a winter grade. It is necessary to bleed out the system with the ports on the bottom of each side of the arch.
  • If any type of mortar is used then cleanliness is key. Cleaning the cylinder shafts reduces the risk of damage to the o-rings in the top of the cylinders. Any kind of silicone spray will also help keep the shafts clean.
    Build-up of dust and mortar.
  • Cleaning and storage are very important factors that are simple to do and a big part of machine maintenance. Often, mortar is used for brick installation, leading to build-up on the arch and decking. Build-up on the decking not only makes it heavier to carry but can also cause a trip hazard. Build-up also hides any damage on parts of the machine such as cracks on the frames, large gouges and damaged aluminum bolts for the spacer assemblies. When choosing a storage place, be sure it is somewhat clean and covered and avoid extreme temperatures if possible. 
  • For 2 t bottle jacks or 3 t hydraulic jacks, be sure they're well oiled and operating properly before there is an outage to ensure that there is enough time to get them replaced if there are any leaks or damage.

  • Safety features are almost non-existent on older machines. There are several retrofit items available to keep machines up to code: for example heavy duty fall guards, new style castors with built in kick rakes, beam and rung style ladders and locking mechanisms for the arch trolley.
    Poor maintenance of the machine – master valve
  •  Doing an evaluation of the machine 2 – 3 months prior to an outage is the best way to check a machine is in good working order. Doing this in a timely manner will also ensure that replacement parts are on hand. If there is nobody to do this or if it is unclear what to look for, then ask the manufacturer if it has an evaluation or yearly maintenance program. If it does, this is an easy way of always keeping a machine in a good condition without the headaches. 

  • Records keeping is a helpful way of keeping track of the maintenance costs on an annual basis and justifying the cost of a new machine with all the latest safety features. This will also raise awareness of the items needing consistent replacement; these items can then also be put in the budget for the following year.

Proper equipment maintenance will not only save money, it will also keep machinery safe and efficient. Brokk and Bricking Solutions have set forth a new division named BBS Technical Services. This focuses on a set guideline that a plant should look at when evaluating its installation equipment before use, in order to eliminate any potential hazards that may diminish safety and efficiency in the installation and raise overall costs. In addition to the above maintenance procedures, a certificated technician will complete a safety inspection/audit of all the installation equipment and components. They will conduct an evaluation of set up procedures, in-kiln movement and or adjustment of the machine, procedures for bricking through tapers, including review in-kiln policies and procedures to the plants bricking rig safety standards. The technicians will train and certify a ‘competent person’ capable of the inspection and review of overall machine assembly, disassembly, operation and safety procedures, consistent with the plant’s Bricking Rig Safety Standards.

Bricking Solutions specializes in manufactured goodsusing the highest quality aluminum T6-6061. The aluminum is as strong as steel but a third of the weight, which allows the equipment to be easily set up and support the greatest amount of weight with good safety ratings. Equipment is designed to international standards using certified aluminum welders before being thoroughly tested. It is important to understand that procedures in welding position, wire and gas have changed over the years. T6-6061 aluminum alloy used in the company’s high strength light weight fabrications must be designed and fabricated to conform to ridged requirements to preserve the high strength characteristics of this heat treated alloy. Welding in the wrong place or applying too much weld can reduce the tensile strength in this material from more than 40 000 PSI
to as low as 11 000 PSI.

Example of poor weld repair.

In 2011, a US cement plant was put in a compromising situation when a refractory contractor happened to notice an enormous crack in the load bearing area of the bricking machine while it was out of the kiln. Should the platform have been used, there could have been a massive failure resulting in lost time, injuries and financial fines. The plant contacted the manufacturer, Bricking Solutions,and a technician from BBS Technical Services visited the plant. The machine was manufactured in 1975 and had undergone many repairs on the frames carried out by someone who was not certified to weld T6-6061 aluminum alloy and not under the guidance of a structural engineer. Upon completion of a two day evaluation, it was determined after receipt of the official report that the machine could no longer be used and a replacement was necessary. Thirty-seven years of refractory installation for a bricking  machine in a rotary kiln is phenomenal but everything has its shelf life. Since then, the plant has invested in a 2011 model bricking machine built to all safety standards and incorporating the latest advances in platform optimization.

15 000 lb capacity work platform allows for three full pallets
of bricks plus men and tools.

All Premium Ez Flexx bricking machines are built with the largest work platform to date. The specified capacity is 17 ft. long with a 15 000 lb live load engineered with a 3:1 safety factor. The plant now has one machine that can install refractory in all three kilns ranging from 14.6 – 19 ft. One of the aspects that increases the efficiency of the new Ez Flexx, and perhaps the most important, is the quick and effortless adjustability that allows the machine to brick through both tapers in K1 and K2. When discussing solutions to reduce costs and increase efficiency, do not let the mechanical elephant in the room become safety. Maintenance is the ideal way of getting the most out of a machine whilst raising awareness of items that
need to be addressed or repaired. A good maintenance plan increases the life span and efficiency of equipment and also reduces the risk of safety hazards with no malfunctioning items. As mentioned, if maintenance or the limits of a machine are unclear, training is all that is required, so simply call the equipment manufacturer and ask.

For more information please contact us. 360-794-1277 / 800-621-7856

Thursday, September 20, 2012

Kiln Access Ramp and Ez Flexx Bricking Machine for Martin Marietta Specialties

Thank you and congratulations to York Lining International and Martin Marietta Specialties for their package order.

They received a custom Kiln Access Ramp with a 15,000 lb. live load capacity with a 3:1 safety factor. The also received a Premium Ez Flexx Bricking Machine designed for their 14 ft. kiln. The bricking machine also have a 15,000 lb live load capacity with a 3:1 safety factor and a 17 ft. work platform.

Bricking Solutions has been designing and manufacturing refractory maintenance products for over 40 years.

We will customize any ramp to fit your specific burn floor and kiln.

Each ramp is custom designed by certified professional engineers

Made with high grade 6061 T6 aluminum, strong as steel and half the weight

Lightweight T6 aluminum construction is easy to handle and install

3/8” (9mm) non-skid diamond plate decking
Radiused nose matches kiln

Designed to support 15,000lbs (6,804kg) live load with a 3:1 safety factor.

Lifting lugs are designed into every ramp to maximize use of forklift for installation.

Most ramps install in less than on hour
 Cut-Away Key Section gives the Key Mason easy access to down kiln arch giving a clear view for critical key brick installation.

Double Arch System adjusts to varying brick sizes utilizing hydraulic cylinders, hydraulic arch jack, screw jacks, & arch hinges allowing the masons to adjust over retaining rings, tapers, & adjust to varying kiln diameters.

Cantilever design makes closing out up kiln, or retaining ring row a breeze and comes standard on all machines

 Color coded occilating polyurethane castor wheels with kick brake & lock out pin allows for safer & easier machine movement without damage to bedded brick.

More ramp photos here

More Ez Flexx photos here

Please email or call us for more information 1-360-794-1277

Thursday, August 23, 2012

Proper refractory staging for efficient and safe refractory installation through safe and effective material handling

The number one reason for slow bricking times is slow supply of brick to the masons. Every plant has different obstacles such as: limited access, small burn floor, small kiln diameter, or the location of the job. Replacement of brick could be down in the cooler or way up in the intake section of the kiln. These are only a few of the many different examples of difficult supply demands. 

Whether you own our EZ FLEXX bricking machine, our old classic MOR or an off brand bricking rig we can help you make the use of your bricking machine more efficient with many material handling options.

If you don’t have access for a fork lift but want to place full pallets of brick up to your bricking machine take a look at our new incline conveyor, for any size bricking machine with a working angle up to 40 degrees.

Your bricking machine does not allow fork lift access up kiln under your rig you may want to consider a couple options:  a 12”/305mm or 20”/508 wide hydraulic conveyer system any length from 20’/6m to 280’/85m to bring brick up kiln feeding your bedding crew and the up kiln end of your bricking machine.  


Another solution for this issue is or unique port-a-track coming standard with 35’/10.5m of track, two pallet carts and a electric winch for pulling full pallets of bricks under your bricking machine up kiln to your bedding crew.

Still using spring boards or crates for your bedding crew to brick to spring line and higher you should check out our custom bedding carts for any size kilns, can be designed to us in multiple diameter kilns.

More Photos HERE

We have spent many hours with customers and contractors going over their needs and transportation is by far the hardest to over come. There are many ways to move brick, on a particular job. There may be only one good way or a combination of ways. That is why we have tried to develop transportation systems that are designed for the specific job at hand. 

contact us or visit our website for more information